
Saw Blade Size Chart: mm to Inch, Bore & Kerf
Convert circular saw blade sizes from mm to inches. Compare catalog diameters, bores and kerfs for furniture, panel trimming and aluminum blades.
Request a QuotePublished
A saw blade size chart is useful when a machine plate, an old blade, or a drawing is marked in inches and the catalog is in millimetres — or the other way around. Diameter must fit the saw, the bore must match the arbor (or a confirmed bushing), and kerf must match the cutting unit, including any scoring blade. This page converts common inch sizes to millimetres and lists the published XinYu Tools diameters, bores and kerfs across the Furniture Series, Panel Trimming Blades and Aluminum Cutting Blades.
It is a conversion and catalog reference, not a tooth-selection guide. For rip, crosscut and laminate tooth plans, use Circular Saw Blade for Wood: How to Choose Teeth, Diameter and Bore. For 10–16 in table-saw setups, use the Table Saw Blade Guide.
Inch figures printed next to catalog diameters are nominal (for example, 255 mm is listed as 10 in). The exact conversion is millimetres ÷ 25.4. Confirm the millimetre diameter, kerf and bore on the model row before you order. Specifications are subject to change without notice. Other sizes, bores and tooth counts are available on request.
How to read this chart
- Start with the millimetre diameter. That is the dimension that has to fit the machine’s maximum blade capacity and flanges.
- Treat the inch column as a nominal size, then check the exact conversion if you are matching an existing blade or a tight guard opening. A 12 in blade is 304.8 mm; the catalog uses both 300 mm (11.81 in) and 305 mm (12.01 in). Those are not the same disc.
- Bore (arbor) is independent of diameter. A 300 mm blade with a 30 mm bore will not mount on a 25.4 mm (1 in) arbor unless you have a confirmed reducing bushing and the flanges still support the plate correctly.
- Kerf is not plate thickness. Kerf is the width the teeth cut. Plate (body) thickness is a separate figure; it is published on many aluminum models and is listed as On request on furniture and panel-trimming models.
- Max RPM and, on aluminum models, tooth grind are On request. Do not copy a speed from another brand’s blade of the same diameter.
Inch to millimetre conversion (standard sizes)
Use this table when a machine manual or an old blade is marked only in inches. The “Usual metric listing” column is industry practice, not a claim that every 10 in saw takes a 255 mm blade.
| Nominal size (in) | Exact conversion (mm) | Usual metric listing (mm) | In the XinYu Tools catalog |
|---|---|---|---|
| 5 | 127.0 | 120–125 | Scoring blades at 120 mm |
| 7 | 177.8 | 180 | Scoring blades at 180 mm |
| 8 | 203.2 | 200 | Scoring blades at 200 mm |
| 10 | 254.0 | 254–255 | Furniture, panel trimming and aluminum blades at 255 mm |
| 12 | 304.8 | 300 or 305 | Furniture at 300 mm; panel trimming and aluminum at 305 mm |
| 13 | 330.2 | 320–330 | Panel trimming at 320 mm |
| 14 | 355.6 | 350–355 | Furniture at 350 mm (no nominal-inch label on that model); aluminum at 355 mm |
| 15 | 381.0 | 380 | Furniture at 380 mm |
| 16 | 406.4 | 400 or 405 | Furniture at 400 mm; aluminum at 405 mm |
| 18 | 457.2 | 450–455 | Aluminum at 450 mm |
| 20 | 508.0 | 500 | Aluminum at 500 mm |
| 22 | 558.8 | 550 | Aluminum at 550 mm |
| 24 | 609.6 | 600 | Aluminum at 600 mm |
The exact conversions use 1 in = 25.4 mm. Catalog labels such as “approx. 10"” or “12"” are the website’s nominal inch, not a second measured diameter.
Why 300 mm is not the same as 305 mm
This is the mismatch that causes the most RFQ delays.
- A 10 in blade is 254.0 mm. Published wood and aluminum models use 255 mm (10.04 in).
- A 12 in blade is 304.8 mm. Furniture main blades are listed at 300 mm (11.81 in). Panel-trimming and aluminum blades are listed at 305 mm (12.01 in).
- A 16 in blade is 406.4 mm. Furniture main blades use 400 mm (15.75 in). Aluminum blades use 405 mm (15.94 in).
If the machine’s maximum capacity is 300 mm, do not assume a 305 mm blade will clear the guard or flanges. If you are replacing a 12 in blade, measure the old disc and write the millimetre diameter in the RFQ, not only “12 inch.”
Catalog diameters, kerf and bore — Furniture Series
TCT and PCD (Polycrystalline Diamond) main blades for panel and solid-wood furniture, plus conical scoring blades. Solid-wood ripping sizes are offered on request and are not listed as fixed models here. Plate thickness and Max RPM: On request.
| Model | Tip | Diameter | Exact in | Catalog inch | Kerf (mm) | Bore (mm) | Teeth | Tooth grind |
|---|---|---|---|---|---|---|---|---|
| FN-T-255-100T | TCT | 255 mm | 10.04 | 10" | 3.2 | 25.4 / 30 / 50 | 100 | ATB / Combination |
| FN-T-255-120T | TCT | 255 mm | 10.04 | 10" | 3.2 | 25.4 / 30 / 50 | 120 | ATB / Combination |
| FN-T-300-72T | TCT | 300 mm | 11.81 | 12" | 3.2 | 30 | 72 | ATB / TCG |
| FN-T-300-80T | TCT | 300 mm | 11.81 | 12" | 3.2 | 30 | 80 | ATB / TCG |
| FN-T-300-96T | TCT | 300 mm | 11.81 | 12" | 3.2 | 30 | 96 | ATB / TCG |
| FN-T-350-84T | TCT | 350 mm | 13.78 | — | 3.5 / 4.4 | 30 | 84 | On request |
| FN-T-380-84T | TCT | 380 mm | 14.96 | 15" | 4.4 | 60 / 75 | 84 | ATB / TCG |
| FN-T-400-84T | TCT | 400 mm | 15.75 | 16" | 4.4 | 60 / 75 | 84 | ATB / TCG |
| FN-D-300-96T | PCD | 300 mm | 11.81 | 12" | 3.2 | 30 | 96 | ATB / TCG |
| FN-D-380-84T | PCD | 380 mm | 14.96 | 15" | 4.4 | 60 / 75 | 84 | ATB / TCG |
| FN-D-400-84T | PCD | 400 mm | 15.75 | 16" | 4.4 | 60 / 75 | 84 | ATB / TCG |
| FN-SC-T-120-24T | TCT | 120 mm | 4.72 | 5" | 3.0 / 4.0 | 20 / 22 | 24 | Inverted trapezoid (conical scoring) |
| FN-SC-D-120-24T | PCD | 120 mm | 4.72 | 5" | 3.0 / 4.0 | 20 / 22 | 24 | Inverted trapezoid (conical scoring) |
| FN-SC-D-180-36T | PCD | 180 mm | 7.09 | 7" | 4.3 / 5.3 | 30 | 36 | Inverted trapezoid (conical scoring) |
| FN-SC-T-200-36T | TCT (as listed) | 200 mm | 7.87 | 8" | 4.3 / 5.3 | 45 | 36 | On request |
| FN-SC-D-200-36T | PCD | 200 mm | 7.87 | 8" | 4.3 / 5.3 | 50 | 36 | Inverted trapezoid (conical scoring) |
FN-T-350-84T has no nominal-inch label on the catalog row; 350 mm is 13.78 in. Its kerf is listed as 3.5 / 4.4 mm — confirm which value you need. Scoring-blade pairing, conical versus split design, and alignment are covered in the Scoring Saw Blade Guide.
Catalog diameters, kerf and bore — Panel Trimming Blades
ATB TCT blades for edge trimming of plywood and wood-based panels. All published models use a 3.2 mm kerf. Plate thickness and Max RPM: On request.
| Model | Tip | Diameter | Exact in | Catalog inch | Kerf (mm) | Bore (mm) | Teeth | Tooth grind |
|---|---|---|---|---|---|---|---|---|
| PT-T-255-100T | TCT | 255 mm | 10.04 | 10" | 3.2 | 25.4 / 30 / 50 | 100 | ATB |
| PT-T-255-120T | TCT | 255 mm | 10.04 | 10" | 3.2 | 25.4 / 30 / 50 | 120 | ATB |
| PT-T-305-80T | TCT | 305 mm | 12.01 | 12" | 3.2 | 25.4 / 30 | 80 | ATB |
| PT-T-305-96T | TCT | 305 mm | 12.01 | 12" | 3.2 | 25.4 / 30 | 96 | ATB |
| PT-T-305-100T | TCT | 305 mm | 12.01 | 12" | 3.2 | 25.4 / 30 | 100 | ATB |
| PT-T-305-112T | TCT | 305 mm | 12.01 | 12" | 3.2 | 25.4 / 30 | 112 | ATB |
| PT-T-305-120T | TCT | 305 mm | 12.01 | 12" | 3.2 | 25.4 / 30 | 120 | ATB |
| PT-T-320-120T | TCT | 320 mm | 12.60 | 13" | 3.2 | 25.4 / 30 | 120 | ATB |
These blades are for edge trimming, not a substitute for a panel-saw main blade plus scorer. Application context is on Plywood & Panel Edge Trimming.
Catalog diameters, kerf, plate and bore — Aluminum Cutting Blades
TCT and PCD blades for aluminum profiles, thermal-break windows and doors, and other non-ferrous metals. Tooth grind and Max RPM: On request. Aluminum inch values on the website are approximate nominal sizes. Kerf and plate are separate specifications. For application guidance, see Saw Blades for Aluminium Window & Door Profiles and How to Choose an Aluminum Cutting Saw Blade.
| Model | Tip | Diameter | Exact in | Catalog inch | Kerf (mm) | Plate (mm) | Bore (mm) | Teeth |
|---|---|---|---|---|---|---|---|---|
| AL-T-255-120T | TCT | 255 mm | 10.04 | approx. 10" | 2.8 | 2.2 | 25.4 | 120 |
| AL-T-255-120T-B | TCT | 255 mm | 10.04 | approx. 10" | 3.0 | On request | 25.4 | 120 |
| AL-T-305-120T | TCT | 305 mm | 12.01 | approx. 12" | 3.0 | 2.4 | 25.4 | 120 |
| AL-T-305-120T-B | TCT | 305 mm | 12.01 | approx. 12" | 3.0 | On request | 25.4 / 30 | 120 |
| AL-T-355-120T | TCT | 355 mm | 13.98 | approx. 14" | 3.2 | 2.5 | 30 | 120 |
| AL-T-405-120T | TCT | 405 mm | 15.94 | approx. 16" | 3.8 | 3.0 | 30 | 120 |
| AL-T-450-96-100T | TCT | 450 mm | 17.72 | approx. 18" | 4.2 | 3.2 | 30 | 96 / 100 |
| AL-T-450-120T | TCT | 450 mm | 17.72 | approx. 18" | 4.4 | 3.6 | 30 | 120 |
| AL-D-450-96T | PCD | 450 mm | 17.72 | approx. 18" | 4.0 | 3.2 | 30 | 96 |
| AL-D-450-120T | PCD | 450 mm | 17.72 | approx. 18" | 4.2 | 3.6 | 30 | 120 |
| AL-T-500-100T | TCT | 500 mm | 19.69 | approx. 20" | 4.2 | 3.6 | 30 | 100 |
| AL-T-500-120T | TCT | 500 mm | 19.69 | approx. 20" | 4.4 | 3.6 | 30 | 120 |
| AL-D-500-120T | PCD | 500 mm | 19.69 | approx. 20" | 4.4 | 3.6 | 30 | 120 |
| AL-T-550-140T | TCT | 550 mm | 21.65 | approx. 22" | 4.8 | 4.0 | 30 | 140 |
| AL-D-550-140T | PCD | 550 mm | 21.65 | approx. 22" | 4.8 | 4.0 | 30 | 140 |
| AL-T-600-144T | TCT | 600 mm | 23.62 | approx. 24" | 5.0 | 4.1 | 30 | 144 |
| AL-D-600-144T | PCD | 600 mm | 23.62 | approx. 24" | 5.0 | 4.1 | 30 | 144 |
The “-B” rows are separate models, not typographical variants. AL-T-255-120T and AL-T-255-120T-B share a diameter but differ in kerf and in whether plate thickness is published. AL-T-305-120T is listed with a 25.4 mm bore; AL-T-305-120T-B is listed with 25.4 / 30 mm. Pick the row that matches the machine, or ask for a custom bore.
Published PCD aluminum diameters start at 450 mm. For smaller TCT diameters, a PCD-tipped version is available on request — state that clearly in the RFQ rather than assuming a PCD SKU already exists at 255–405 mm.
Bore (arbor) sizes in the catalog
The bore must match the arbor. A bushing can reduce a larger bore to a smaller arbor only when the flanges still support the blade body and the machine maker allows it. Do not bore out a smaller hole to fit a larger arbor.
| Bore (mm) | Exact in | Typical use in this catalog |
|---|---|---|
| 20 / 22 | 0.79 / 0.87 | 120 mm scoring blades (both TCT and PCD) |
| 25.4 | 1.00 | Common option on 255 mm and 305 mm wood and aluminum blades |
| 30 | 1.18 | The most common furniture, panel and aluminum bore from 180 mm upward |
| 45 | 1.77 | FN-SC-T-200-36T (200 mm scoring, as listed) |
| 50 | 1.97 | FN-SC-D-200-36T; also a bore option on several 255 mm furniture and panel blades |
| 60 / 75 | 2.36 / 2.95 | 380 mm and 400 mm furniture main blades (TCT and PCD) |
If the machine plate says “1 inch arbor,” that is 25.4 mm, not 30 mm. If it says “30 mm,” do not order a 25.4 mm bore and hope a bushing is in the crate. Write the arbor size in millimetres in the RFQ, and say whether a bushing is already on the saw.
Kerf: what the number is for
Kerf is the width of the cut, set by the tooth tip, not by the steel body. It matters for three practical reasons:
- Material yield. A wider kerf removes more of the panel or profile on every cut.
- Machine and scoring match. On a panel saw, the scoring kerf must be set to work with the main-blade kerf. See the Scoring Saw Blade Guide.
- Motor load and stability. A kerf that is much heavier than the saw is set up for can load the motor; a kerf that is too thin for the plate and the cut can reduce body stiffness. Use the published kerf, and ask if you need a different width.
Published kerf groups in this catalog:
- Furniture main blades: 3.2 mm at 255–300 mm; 3.5 / 4.4 mm at 350 mm; 4.4 mm at 380–400 mm.
- Scoring blades: 3.0 / 4.0 mm at 120 mm; 4.3 / 5.3 mm at 180–200 mm (two kerf options — confirm which option you will run).
- Panel trimming: 3.2 mm on every published model.
- Aluminum: 2.8–5.0 mm, increasing with diameter; see the aluminum table for the value on each model.
What to send in an RFQ when the machine is marked in inches
Request a quote — or write to info@xinyutools.com — and include:
- Material and cut (furniture panel, edge trim, aluminum profile, and so on).
- Maximum blade diameter allowed by the machine, in millimetres if you have it, otherwise the inch size plus a measured disc if you are replacing one.
- Arbor / bore in millimetres (25.4, 30, or another size), and whether you already use a bushing.
- Kerf of the blade you are replacing, if you want a direct match, plus whether a scoring unit is fitted.
- Tooth count and grind if you already know them; otherwise describe the finish you need.
- Tip type: TCT or PCD. A PCD-tipped version is available on request for TCT models.
- Machine type and, if possible, the model name, so bore and diameter can be checked against the unit.
Do not send only “12 inch blade.” A 12 in request can mean 300 mm or 305 mm, and those rows also differ by series, kerf and bore options.
FAQ
Is a 10 inch saw blade the same as 255 mm?
A 10 in blade is exactly 254.0 mm. 255 mm (10.04 in) is the usual metric listing, and it is the diameter XinYu Tools publishes for 10 in furniture, panel-trimming and aluminum models. Confirm the millimetre diameter, kerf and bore on the model row; inch figures on the site are nominal.
Is a 12 inch blade 300 mm or 305 mm?
A 12 in blade is exactly 304.8 mm. In this catalog, furniture main blades are listed at 300 mm (11.81 in), while panel-trimming and aluminum blades are listed at 305 mm (12.01 in). Check the machine’s maximum diameter before you treat them as interchangeable.
What bore is a 300 mm saw blade?
Published 300 mm furniture main blades (FN-T-300-72T, FN-T-300-80T, FN-T-300-96T and FN-D-300-96T) use a 30 mm bore. Other diameters in the catalog also offer 25.4 mm or additional bores. If your arbor is 25.4 mm (1 in), say so in the RFQ rather than assuming a 30 mm blade will mount.
Is kerf the same as plate thickness?
No. Kerf is the width the teeth cut. Plate thickness is the steel body. On many aluminum models both figures are published (for example, AL-T-305-120T is 3.0 mm kerf and 2.4 mm plate). On furniture and panel-trimming models, plate thickness is On request.
Can I order a diameter, bore or kerf that is not in the tables?
Yes. Other sizes, bores and tooth counts are available on request. Send the machine limits, arbor size and the cut you need. Solid-wood ripping sizes are also on request, not a fixed list.
Do these inch conversions apply to reciprocating saw blades?
No. This chart covers circular saw blades only. XinYu Tools does not list reciprocating saw blades.
Related pages
- Furniture Series
- Panel Trimming Blades
- Aluminum Cutting Blades
- Circular Saw Blade for Wood: How to Choose Teeth, Diameter and Bore
- Table Saw Blade Guide: Sizes, Tooth Counts and Blade Types
- Scoring Saw Blade Guide: Sizes, Conical vs Split
- Saw Blades for Aluminium Window & Door Profiles
- How to Choose an Aluminum Cutting Saw Blade
- Contact / RFQ